IRP rear axle carrier reinforcement plates welding plates set suitable for BMW E46 (steel)

✅ to strengthen/repair the rear axle mounts
✅ Particularly suitable for existing damage
✅ Laser cut
✅ made in the EU

REINFORCE AND REPAIR

This set was specially developed for the well-known weak points of the E46 rear axle carrier mounts, which tend to give up even during normal driving. The result is a torn out rear axle, up to and including the entire trunk floor. In racing, this damage usually occurs after a short time.
These weak points are eliminated with the reinforcement plates and damage that has already occurred can be repaired.

EVERYTHING INCLUDED

The set includes four laser-cut reinforcement plates for the axle mounts, two spacer plates for the differential mounts and two repair plates to close the necessary cut-outs in the trunk.

MEASUREMENTS

A major reason for the well-known damage to the rear axle carrier mounts is that the rear axle carrier bearings are too soft. These allow the rear axle too much room to move during load changes, which puts an additional heavy load on the body structure. For this reason, we recommend going through the bearings of the rear axle carrier when carrying out the repair harder or stare to replace bearings.

Delivery: 4x reinforcement plates for rear axle carrier mounts, 2x compensating plates for differential mounts, 2x repair plates for trunk

TECHNICAL SPECIFICATIONS

7-10 working days (from receipt of payment)