FAMEFORM Compact trailing arm rear axle camber/toe adjustment set V2 suitable for BMW E30 E36 (for welding in)

✅ more traction on lowered vehicles
✅ one-sided abrasion of the rear tires can be repaired
✅ CNC lasered weld-in pieces
✅ Adjustable camber and toe values

ALL BENEFITS AT A GLANCE

With the Fameform welding-in adjustment set, the handlebar mounts of the rear axle carrier can be modified so that the camber and toe can be adjusted.

WHY YOU NEED THIS

On the original rear axle of the BMW models E30 (except M3), E34, E36 Compact and Z3 there is no possibility to adjust the toe-in or the camber. However, precisely after a lowering, precisely these values ​​change due to the axle geometry. This can lead to severe one-sided wear of the tires and an associated loss of traction. It is therefore extremely important to be able to set the camber and toe correctly, especially in sporty moving vehicles or in motor sports.

Of course you can also use this set to increase the negative camber for visual reasons.

DETAILS

The toe-in and camber values ​​are adjusted in stages by moving toothed shims. In this way, the set values ​​cannot change even under the most extreme loads (e.g. in rallying).
Delivery: 8 toothed welding pieces, 8 toothed washers, 4 nuts, 8x washers

TECHNICAL SPECIFICATIONS