✅ 30mm roll center correction (roll center correction)
✅ 30mm Bump-Steer-Correction (Correction of toe change by spring deflection)
✅ 30% faster steering ratio (approx. 1 less turn of the steering wheel, for the same steering angle)
✅ 60% weight saving compared to the OEM parts
✅ Kit is available for standard gauge or with 60mm gauge extension
✅ Fully adjustable chassis parameters: track width, wheelbase (caster), pitching movement when braking
✅ 15mm adjustment range for track width
EVERYTHING IS UNDER CONTROL
With the Handling & Grip Kit from MRT Engineering you can correct unwanted changes in the chassis geometry by lowering and adjust it exactly to your requirements. In addition, the steering ratio is increased and the unsprung mass is greatly reduced thanks to the lightweight aluminum construction. The kit is also available with a 60mm track extension (+30mm per side / not for E46 | E85). In addition, the track width of all kits can be extended by 15mm.
WHAT IS ALL FOR
Vehicles from BMW are already known for sophisticated chassis geometries and the associated performance on circuits. In order to further improve this performance, a lowering is often made. However, this not only changes the vehicle height but also the entire axle geometry, which was originally designed for the factory height of the vehicle. This primarily affects the roll center, the change in track due to the spring deflection and the camber of the wheels.
STRONG FLYWEIGHT
The components are made of AW-7075 aluminum (aerospace grade), 42CrMo steel and grade 5 titanium. Thus, they offer the lightest weight on the market without sacrificing strength.
MEASUREMENTS
For installation, a threaded sleeve must be welded to the vehicle on each side as an additional mounting point for the rear wishbone arm. These are of course included in the scope of delivery. Furthermore, a handlebar limiter that fits your setup is required. This is explained in the enclosed installation instructions.
If you have any questions, please feel free to contact us.
When ordering, please be sure to let us know your vehicle model and chassis setup!
The E30 M3 Kit comes without a steering angle adapter! Delivery: front wishbones, rear wishbones, steering angle adapter (not with E30 M3 kit), wishbone mounts, fastening material, installation instructions
Delivery time: 7 - 10 working days (from receipt of payment)
TECHNICAL SPECIFICATIONS
Manufacturers |
MRT engineering |
Suitable for |
E30 | E30 M3 | E36 | E36 M3 | E46 | E46 M3 | Z4 | Z4M |
Material |
Steel, AW-7075 aluminum, titanium |