✅ 3-stage adjustable bump steer (toe-in change through spring deflection)
✅ 50% lighter than the original tie rods
✅ replaceable CrMo tie rod ends with Uniball bearings
✅ Tie rods made of AW-7075 aluminum
FULL CONTROL
With the 3-stage adjustment of the Bump-Steer (toe-in change through spring deflection) you can quickly and easily adjust your steering to the respective route and your needs. The whole thing works with two washers, which are easily implemented according to your requirements. All you have to do is unscrew the tie rod end. This allows you to quickly make the settings yourself under time pressure and without a lot of tools.
MUCH LIGHTER
The tie rods are made of AW-7075 aluminum and the tie rod ends are made of CrMo steel. This brings a full 50% weight reduction compared to the OEM tie rods, without loss of rigidity.
MEASUREMENTS
The MRT Engineering tie rods fit all E30/E30 M3 (min. wheel size 15"), E36/E36 M3 (min. wheel size 15"), E46/E46 M3 and E85 (no Z4M) steering knuckles. For assembly on the E30 and E36, the inner tie rods from the E36 are required! On E46 and E85 models it may be necessary to use the inner tie rods from the E90.
Do you have any questions? Then just contact us!
Delivery: 2 x tie rod, 2 x tie rod end, fastening material
Delivery time: 7 - 10 working days (from receipt of payment)
TECHNICAL SPECIFICATIONS
Manufacturers |
MRT engineering |
Suitable for |
E30 | E30 M3 | E36 | E36 M3| E46 | E46 M3 | Z4 (no Z4M) |
Weight |
750 g |
Material |
AW-7075 aluminum, CrMo steel |