✅ Adjustable bump steer
✅ Significantly lighter than the original tie rods
✅ Tie rod ends with Uniball bearings
✅ Tie rods made of AW-7075 aluminum
JUST LOWERING IS NOT ENOUGH
When lowering your vehicle, the axle geometry changes, which, however, was aligned to the vehicle height in the factory condition. Of course, these changes do not have a positive effect on driving behavior. With these tie rods you can achieve a precise steering feel again thanks to a large bump steer adjustment range.
FULL CONTROL
With the adjustable bump steer tie rod kit for BMW E30 / E36 / E46 models including Z3 / Z4 and Compact (except E30 iX / E46 xi/xd models and Z4M) you get new, lighter and highly adjustable tie rods according to 90- 92' DTM specification with additional bump steer adjustment range for all applications. This is in the range of 10mm to 35mm and can be corrected in steps of 5mm.
MUCH LIGHTER
The tie rods are made of AW-7075 aluminum and the tie rod ends are made of CrMo steel. This brings an enormous weight reduction compared to the OEM tie rods, without loss of rigidity.
MEASUREMENTS
Can be screwed to the E30 / E36 racks! For E46 racks, we recommend grinding a 6mm wide, 3mm deep guide slot for the fork head. Minimum recommended wheel size is 15" with E30 axles/knuckles, 16" with E36 or E46 axles/knuckles. Not suitable for Z4M steering knuckles.
Comes with all required mounting hardware.
The kit can be used with stock uprights and also in addition to any MRT Engineering RACE or roll center correction kits.
No special tools are required for assembly, all parts bolt directly to the hardware mentioned in the item description.
Do you have any questions? Then just contact us!
Delivery: 2x tie rods (incl. mounting material)
Delivery time: 7-10 working days (from receipt of payment)
TECHNICAL SPECIFICATIONS
Manufacturers |
MRT engineering |
Suitable for |
E30 | E36 | E46 | Z4 (no Z4M) |
Material |
AW-7075 aluminum, CrMo steel |