VERKLINE wishbone bushes 37mm suitable for Audi B2 B3 B4 (PU)

✅ Significantly more direct feedback to the driver
✅ Suspension can react faster and more accurately
✅ Enables exact adjustment of the chassis

ALL BENEFITS AT A GLANCE

Factory landing gear bushings tend to be soft for comfort and provide a degree of play at the linkage. However, the forces occurring at the wheel are then transmitted to the chassis in a distorted manner and vice versa. As a result, the chassis is sluggish and cannot react to these forces to the full extent of its capabilities. This also applies to the driver. With harder bushings, this play can be reduced to a minimum and the chassis can be fully exploited.

If values ​​such as camber, track, caster, etc. are set, the vehicle is at a standstill. If it is now set in motion, there will be slight deviations from these values ​​due to the intended play in the factory rubber bushings. While these deviations are negligible in road traffic, they can make the difference between victory and defeat at the limit. Hard bushings reduce this play to a minimum and ensure that you always ride at the exact values ​​you set.

DETAILS

Delivery: 4x PU bushing, 4 centering sleeves for the PU bushings, 4 metal washers, 4 Teflon washers, grease for assembly

TECHNICAL DATA

Suitable for:
- Audi B2/B3/B4 (not for cast iron wishbones) - 37mm pressed front wishbones
- Audi B2 Sedan/Coupe - 37mm pressed rear wishbones
- Audi B3 Sedan/Coupe - 37mm pressed rear wishbones
- Audi B4 Coupe - 37mm pressed rear arms

Replaces the following OEM part number:
- 8A0 407 181