VERKLINE stabilizer bushings 16mm suitable for Audi B4 A4 S4 B5 A6 C5 rear axle (PU)

✅ Significantly more direct feedback to the driver
✅ Suspension can react faster and more accurately
✅ Enables exact adjustment of the chassis

ALL BENEFITS AT A GLANCE

Factory landing gear bushings tend to be soft for comfort and provide a degree of play at the linkage. However, the forces occurring at the wheel are then transmitted to the chassis in a distorted manner and vice versa. As a result, the chassis is sluggish and cannot react to these forces to the full extent of its capabilities. This also applies to the driver. With harder bushings, this play can be reduced to a minimum and the chassis can be fully exploited.

If values ​​such as camber, track, caster, etc. are set, the vehicle is at a standstill. If it is now set in motion, there will be slight deviations from these values ​​due to the intended play in the factory rubber bushings. While these deviations are negligible in road traffic, they can make the difference between victory and defeat at the limit. Hard bushings reduce this play to a minimum and ensure that you always ride at the exact values ​​you set.

DETAILS

Delivery: 2x rear stabilizer bushing 16mm, mounting grease

TECHNICAL DATA

Suitable for:
- Audi B4 Sedan/Avant with 16 mm anti-roll bar diameter
- Audi RS2
- Audi A4/S4/RS4 B5 Quattro with 16 mm anti-roll bar diameter
- Audi A6/S6 C5 Quattro with 16 mm anti-roll bar diameter

Replaces the following OEM part number:
- 8A0 511 327 E