Payment & Financing
At the checkout you will find all payment options and providers for financing.
✅ More usable steering angle thanks to improved geometry
✅ Higher roll center and bump steer correction
✅ minimal camber changes when compressing
✅ optimized restoring forces
PROVEN WITH THE PROFESSIONALSWISEFAB steering angle kits can be found on almost every Formula Drift team. The best proof of the superior benefits and performance these kits bring.
MORE OF EVERYTHINGThe specially designed wishbones give the bike significantly more room to turn. Together with the optimized tie rods, this results in a steering angle of up to 65°. If that's too much for you, you can set it smaller.
The lower wishbone also has 3 mounting points for the shock absorber. The hardness of the suspension and thus the handling can be adjusted in a few minutes.
IMPROVED KINEMATICS AND GEOMETRYDue to the optimized chassis geometry, the camber of the front wheels remains stable over the entire steering range and thus always offers you perfect grip on the front wheels.
An increased roll center improves the feedback you get from your steering and reduces body roll in corners and during rapid changes of direction. This optimization of the roll center even allows the front anti-roll bar to be removed.
Since the spread can become a problem with such large steering angles, this point was also optimized without minimizing the restoring forces. Instead, the restoring forces are almost constant and easy to control over the entire steering range thanks to sophisticated kinematics.
Furthermore, the geometry was designed in such a way that, despite the high steering angle, the steering cannot jam when the steering is fully turned.
MEASUREMENTSThe kit was developed for a vehicle height of 80 mm (front axle carrier to the ground).
A maximum wheel circumference of 635 mm is recommended (215/45R17, 225/45R17, 235/40R17, 225/40R18 etc.).
Minimum wheel size is 17", 18" is recommended.
The recommended backspace is 135 mm (7" ET45; 8" ET35; 9" ET20). If the ET is larger, track plates must be used.
This kit requires the use of a coilover kit and is a motorsport product and not approved for public road traffic.
Delivery: Upper/lower wishbones, tie rods, tie rod ends, steering knuckles, fastening material, installation instructions
Delivery time: 5-7 working days (from receipt of payment)
|Suitable for||Toyota Soarer Z30|
Use the installation service in our workshop and arrange yours today Appointment with us!
Maybe you like too
Promotions, new products and special offers. Right in your inbox.