Payment & Financing
At the checkout you will find all payment options and providers for financing.
✅ Significant weight savings, especially unsprung mass
✅ higher roll center
✅ Adjustable bump steer, stabilizer ratio and anti-squat
✅ optimized camber changes during compression
✅ All struts and handlebars are equipped with Uniball bearings
PROVEN WITH THE PROFESSIONALSWISEFAB steering knuckle kits can be found on almost every Formula Drift team. The best proof of the superior benefits and performance these kits bring.
EVERYTHING UNDER CONTROLWith the WISEFAB steering knuckle kit you get full control over all settings, bump steer and anti-squat of your rear axle.
In addition, the WISEFAB kit weighs significantly less than the corresponding OEM parts. This mainly affects unsprung mass.
IMPROVED KINEMATICS AND GEOMETRYDue to the optimized chassis geometry, the camber of the rear wheels remains almost constant over the entire suspension travel and thus always offers you perfect grip on the drive wheels. Thanks to the design of the wishbones, you can also adjust the camber of the rear wheels according to your requirements.
The increased roll center reduces body roll in corners and during rapid changes of direction.
Bump steer also plays a role on the rear axle. With the WISEFAB steering knuckle kit, you can gradually adjust the toe change when compressing to the track and your requirements.
Anti-Squat reduces rear wheel deflection when accelerating. As a result, more load and therefore more grip is transferred to the tires. How strong the anti-squat should be can of course be adjusted in a wide range with this kit.
The upper wishbones have 3 mounting points for the anti-roll bar. In this way, the transmission ratio of the anti-roll bar and thus the tendency of the vehicle to oversteer or understeer can be changed.
MEASUREMENTSMinimum wheel size is 17". The track width corresponds to the OEM values.
All handlebars are delivered preset and can be installed directly.
This kit requires the use of a coilover kit with struts (combined spring and shock absorber) and is compatible with Nissan S-chassis steering knuckles. The kit is a motorsport product and is not approved for use on public roads.
Delivery: Steering knuckle left & right, all required links left & right, adapter for the front screwing point of the upper wishbone, fastening material, installation instructions
Delivery time: 5-7 working days (from receipt of payment)
|Suitable for||Nissan 350Z|
Use the installation service in our workshop and arrange yours today Appointment with us!
Promotions, new products and special offers. Right in your inbox.