WISEFAB DRIFT & TRACK steering knuckle kit suitable for Toyota Soarer Z30 rear axle

✅ maximum grip
✅ Significant weight savings, especially unsprung mass
✅ higher roll center
✅ improved anti-squat
✅ optimized camber changes during compression
✅ All struts and handlebars are equipped with Uniball bearings

PROVEN WITH THE PROFESSIONALS

WISEFAB steering knuckle kits can be found on almost every Formula Drift team. The best proof of the superior benefits and performance these kits bring.

EVERYTHING UNDER CONTROL

With the WISEFAB steering knuckle kit you get full control over all settings, bump steer and anti-squat of your rear axle.

In addition, the WISEFAB kit weighs significantly less than the corresponding OEM parts. This mainly affects unsprung mass.

IMPROVED KINEMATICS AND GEOMETRY

Due to the optimized chassis geometry, the camber of the rear wheels remains almost constant over the entire suspension travel and thus always offers you perfect grip on the drive wheels. Thanks to the design of the wishbones, you can also adjust the camber of the rear wheels according to your requirements.

The increased roll center reduces body roll in corners and during rapid changes of direction.

Anti-Squat reduces rear wheel deflection when accelerating. As a result, more load and therefore more grip is transferred to the tires.

With variable screwing points for the shock absorbers, you can change the spring rate in a few minutes without changing the springs yourself.

MEASUREMENTS

Minimum wheel size is 17". The track width corresponds to the OEM values.

All handlebars are delivered preset and can be installed directly.

This kit requires the use of a coilover kit and is designed for a vehicle height of ~80 mm (rear axle carrier to the ground). The kit is a motorsport product and is not approved for use on public roads.

Delivery: Steering knuckle left & right, all required handlebars left & right, fastening material, installation instructions

TECHNICAL SPECIFICATIONS

5-7 working days (from receipt of payment)