✅ for screwing
✅ more safety and rigidity
✅ with certificate
✅ Available in 2 variants
NO STRESS WITH BENDING AND CUTTING
The brackets are designed using a 3D model of the corresponding car. Of course, a distinction is also made between all body variants. Thus, a perfect fit can be guaranteed.
The tubes are screwed together using FIA connectors. All you have to do is weld the supplied reinforcement plates to the bodywork points where the roll bar is screwed on.
SIMPLY SAFE
Installed, this roll bar helps your vehicle to achieve significantly more safety and also to a higher rigidity of the body.
If you choose the kit, a welding test is required for the certificate. A welding test sample is included in the scope of delivery, which is sent back to us after completion for a load test. It is subjected to a physical test to determine the actual yield point of the weld. This ensures that the roll bars achieve the highest connection standards. Certificates are only issued after a successful test.
The reinforcement plates supplied must be welded to the bodywork points where the roll bar is to be bolted. Some vehicles require the roll bar to be in two pieces in order to insert it into the vehicle. FIA connectors are used for assembly.
MEASUREMENTS
The images are for illustrative purposes only. The supplied roll bar may vary slightly in shape and arrangement of the tubes depending on the vehicle model!
PLEASE NOTE! Car bodies without a sunroof are used for the construction of the cells and cages. This ensures that the cell is as close to the roof skin as possible, giving you maximum protection and headroom. If your vehicle has a sunroof, all you have to do is remove it. If you have any questions, please feel free to contact us.
Every AST cage, roll bar and AST cell is made to order. It is therefore a custom-made product that cannot be exchanged. However, this does not apply to technical defects in the product.
We do not guarantee the professional installation in your vehicle. The installation and welding should always be carried out by qualified personnel with the appropriate experience.
The kits always come unpainted.
Installation instructions with an installation plan will be emailed to you after delivery.
Delivery: Pipes, consoles, screws, material reports on request, certificate possible
TECHNICAL SPECIFICATIONS
Manufacturers |
AST |
Suitable for |
Dacia Sandero DJF |
weight V1 |
39,2 kg |
weight V2 |
52,2 kg |
Explanation "kit" |
Pipes have to be welded together by yourself |
Statement "Welded" |
Bracket is delivered fully welded |
Interconnects |
FIA connector |
Material |
E355 (DIN EN-10305-1 / precision steel, seamless cold-drawn) |
main bracket |
45 x 2,5 mm |
Pipes |
40 x 2,0 mm |