SHUT IT DOWN
The Chase Bays BMW E36 Power Steering Kit is designed to address known factory power steering leaks, fluid spills or overheating issues, coupled with improved aesthetics and increased durability.
It is a 100% improved replacement part of the original reservoir and hoses, from the reservoir to the pump to the rack.
The revised power steering reservoir with triple wall (ventilation and overflow protection) is the heart of this kit. It is offered with an optional upgraded black aluminum radiator that mounts on the top core support (see photos) for easy installation and additional airflow.
Chase Bays uses only the highest quality components available. The reservoir is made of 6061 aluminum and is black anodized with a laser engraved cap. The reservoir itself uses our Delrin mounting bracket to conveniently use the reservoir's OEM BMW mount (Fun Fact: This allows the reservoir to fit virtually any BMW).
COMPLEX CONTAINER DESIGN
Countless hours of research and development have gone into the power steering reservoir. It is not so easy to put two connections on one liquid container. The smaller port on the reservoir is the liquid return. It can be transported at pressures of up to 8,2 bar via the return. When this hits the liquid in the reservoir it can cause extreme foaming on the vent if not properly slowed down and aimed.
The higher the steering movement and the speed of the vehicle, the higher the pressures in the system. This is also the reason for the cap spilling over under heavy use. Most people assume their liquid is boiling over when this happens, but in most cases it doesn't - it's mostly just "turbulence".
Chase Bays put a lot of development time into the design to completely counteract this venting and overflow. The performance of this power steering reservoir has received rave reviews from our customers. In the photos of the container you can see a "smoke vent" inside, which is characterized by a multi-layer design - you will definitely no longer have ventilation or overflow problems.
The optional inline heatsink is made entirely of aluminum. It is black anodized for a durable and unobtrusive finish. Very compact but very effective. We observed a temperature drop of 20°C with this cooler.
THE PERFECT HIGH PRESSURE HOSE
The high-pressure hose that leads to the pump consists of a Teflon-coated -6AN stainless steel flexible line with a plastic jacket. This coating is critical, it makes the hose resistant to chafing when in contact with metal or another hose. The -6AN frame to the reservoir and the -10AN hose from the reservoir to the pump are abrasion resistant, covered in black nylon and reinforced with stainless steel. They are all fitted with premium black aluminum AN fittings and crush washers with a larger surface seal.
MEASUREMENTS
Note: For 2JZ-GTE VVTi, the power steering pump needs to be changed to a non 2JZ-GTE VVTi pump because this engine is factory-equipped with a variable pressure pump, which can cause steering problems.
Delivery: Chase Bays power steering kit, power steering cooler (depending on selection)
Delivery time: 7-10 working days (from receipt of payment)
TECHNICAL DETAILS
The kit fits the following models:
- BMW E36 with Toyota 1JZ-GTE, 1JZ-GTE VVTi and 2JZ-GTE engine