CYBUL wishbone suitable for BMW E8X E9X no M rear axle adjustable set Uniball (steel)

✅ simple correction of the axis geometry
✅ Uniball stored
✅ Stiffer and more direct connection
✅ Made from high-strength steel
✅ Includes leading, wishbone and toe link

MORE POSSIBILITIES

The original handlebars do not offer any adjustment options ex works. However, this is necessary, especially after a lowering, in order to align the axle geometry correctly or as desired. In motorsport, an adjustment of the axle geometry to the needs of the driver and the conditions of the respective track is indispensable anyway.

With the adjustable handlebar set from Cybul, you can easily adjust the camber and toe in a wide range, even when installed.

STIFFER, MORE DIRECT, BETTER

The standard handlebar bearings are very soft for reasons of comfort. However, this has no particularly sporty influence on the handling. The uniball bearing creates a much stiffer, but not rigid, connection between the rear axle carrier and the wheel carrier. The result is a significantly more direct feedback and handling of the rear axle.

If values ​​such as camber, track, caster, etc. are set, the vehicle is at a standstill. If it is now set in motion, there will be slight deviations from these values ​​due to the intended play in the factory rubber bushings. While these deviations are negligible in road traffic, they can make the difference between victory and defeat at the limit. Uniball bearing bushings eliminate this play and ensure you always ride at the exact values ​​you set.

DETAILS

Each pair of handlebars can also be ordered individually. Simply select the desired one in the options.

OEM Part Numbers: 33 32 6 782 237, 33 32 6 782 238, 33 32 6 777 980, 33 32 6 763 471
Delivery: Set for left + right (2x trailing arm, 2x wishbone, 2x toe arm)

TECHNICAL SPECIFICATIONS