Available for PFL (pre-facelift) and FL (facelift) 46 models.
The 4-piece option is also available for the Down Under version and includes all 4 main roll bars if that's exactly what you're looking for.
This offer is for a 12-piece widebody kit.
+35/55 mm per side front/rear widening above the standard fender line.
The same kit is also suitable for a convertible. To accommodate the convertible's lower waistline in the trunk area, it is recommended to cut approximately 20mm from the top edge of the rear panels.
MATERIAL – Reinforced GRP, with an additional layer of multi-axial fiberglass fabric. This improved the structural rigidity of the fenders. This allows us to make them very light while at the same time designing them to withstand contact with the edge of the rim, stones, burst tires, etc.
The rear arch endline is reformed and raised by approximately 20mm, allowing you to eliminate the tilt effect and properly align your E36. No more exposed rear axle and exhaust.
- It is recommended that the installation be carried out by a body shop. Adjustments may be required to ensure a proper fit, including cutting, trimming, padding, sanding and adjusting.
- Before painting, it is recommended to preheat fender flares to release trapped air beneath a gel coat.
All Fitment Lab parts have a TÜV test report.