✅ Suitable for steering gears with a diameter of 27mm/28mm
✅ uncomplicated installation
✅ CNC machined Delrin
✅ maintenance free
WHY YOU NEED THIS
Tie rod stops are required on custom front geometry setups where the steering angle is increased or the control arm design limits the maximum steering angle. These rack stops limit the maximum travel of the rack to prevent the wheel from contacting the chassis or wishbones.
EASY INSTALLATION
The inner ends of the tie rods must be removed to slide them onto the steering rack. No special tools or other modifications are required.
THE RIGHT SIZE FOR EVERY PURPOSE
Available in 3 different length options:
- 18mm (for roll center/bump steer/angle kits with stock wishbones, drift applications),
- 25 mm (for roll center/bump steer/angle kits with stock wishbones or RACE wishbone kits without quick steering adapter, shifting applications),
- 32 mm (for RACE wishbone kits with quick steering adapter, circuit applications)
NOTE: Driver and passenger sides are generally different sizes. If you are not sure which length you need, go for the longer one, as you can always shorten the limiter if a larger steering angle is to be used.
MEASUREMENTS
Delivery: 1 steering lock limiter
TECHNICAL SPECIFICATIONS
Manufacturers |
MRT engineering |
Suitable for |
BMW E36 non-M & M3 BMW E46 (not M3) |
Material |
Delrin |