High quality, lightweight, full flow fittings for nitrile fuel hoses, approved for ethanol. Nuke Performance offers a wide range of hose ends. With the AN series you get a perfect solution for all types of fuels. Wide selection and different sizes.
Available in AN-4 / AN-6 / AN-8 / AN-10 / AN-12 For Nuke Performance Full-Flow AN Fuel Hose Full flow hose connectors for motorsports. Optional straight / 30 / 45 / 60 / 90 / 120 / 150 / 180 degrees, safe for all types of fuels including ethanol.
The Nuke Performance Full Flow Series features AN hose ends and a high quality black nylon racing hose reinforced with a single braid of bright, corrosion-resistant Type 302 stainless steel wire mesh. The black braided nylon coating makes this lightweight hose both durable and attractive. Safe for alcohol fuels, but for long-term use, consider the Nuke Performance Full Flow PTFE series, which offers significantly longer life when using alcohol fuels such as ethanol.
WHAT DOES AN AND DASH MEAN?
Hoses and connection threads are usually given in dash sizes in motorsport. Dash sizes are based on American Air-Force and Navy (AN) specifications and are calculated as follows: Multiply the nominal hose diameter (specified internationally in inches) by 16. For example, a 1/2" hose is a Dash 8 and a 1" hose the size Dash 16.
The appropriate connections and threads are also given in Dash (AN). The most common thread type used in motorsport is the JIC tapered thread (now SAE 37°), where the male thread has a convex taper and the female thread has a concave taper of 37°, eliminating the need for a sealing ring.
The designation of the JIC thread is either in the Dash size, eg 3 JIC or -3AN or with the thread dimension in inches eg 3/8 JIC or 3/8x24 JIC. Just like metric threads, JIC threads are specified with the actual diameter of the external thread.
VERSATILE APPLICABLE
With the hose fittings and the associated hydraulic hoses, you can make your own oil, water and fuel lines. Thanks to the screw connections, the lines are tight and pressure-resistant up to at least 35 bar without the need for a press tool.
We recommend -4 AN for oil feed lines (fits on GT-R inlet adapter and on the integral EFR reducer), -10 AN for oil return lines (fits on threaded return flanges). It is best to choose fuel and water lines according to the specifications of the connections or petrol pumps.
Depending on the area of application, we recommend turning at least one side.
MEASUREMENTS
Delivery: 1x Dash hose connector
TECHNICAL SPECIFICATIONS
Material |
Aluminium
|
Color |
schwarz eloxiert |