✅ Significantly more direct feedback to the driver
✅ Durable bushings
✅ Suspension can react faster and more accurately
✅ Enables exact adjustment of the chassis
ALL BENEFITS AT A GLANCE
Factory landing gear bushings tend to be soft for comfort and provide a degree of play at the linkage. However, the forces occurring at the wheel are then transmitted to the chassis in a distorted manner and vice versa. As a result, the chassis is sluggish and cannot react to these forces to the full extent of its capabilities. This also applies to the driver. With harder bushings, this play can be reduced to a minimum and the chassis can be fully exploited.
If values such as camber, track, caster, etc. are set, the vehicle is at a standstill. If it is now set in motion, there will be slight deviations from these values due to the intended play in the factory rubber bushings. While these deviations are negligible in road traffic, they can make the difference between victory and defeat at the limit. Hard bushings reduce this play to a minimum and ensure that you always ride at the exact values you set.
The set includes the following sockets:
- 4x Front connecting rod bushing
- 4x Rear axle lower wishbone inner bush
- 4x Rear axle lower wishbone outer bush
- 6x Rear axle upper wishbone inner/outer bushing
- 2x Rear stabilizer bushing 11-22mm
MEASUREMENTS
With this kit you replace all OEM bushings on the rear axle.
Do you only need individual sockets from this set? No problem, just write us one e-mail or call us.
Delivery: complete socket set rear axle, mounting grease
TECHNICAL SPECIFICATIONS
Manufacturers |
Strongflex |
Material |
Polyurethanes |
Suitable for |
Mazda MX-5NA (1989-1998) |