✅ more direct handling
✅ Stable uniball bearings
✅ Enables exact adjustment of the chassis
✅ Particularly suitable for racing
ALL BENEFITS AT A GLANCE
Especially when used on the race track, the cornering forces bend the rubber in the wishbones. This changes the desired geometry of the car. This can result in slower track times and increased tire wear.
For this reason, Verkline developed Uniball wishbones. These use metal-on-metal Uniball, known from the Porsche RS line (GT2RS, GT3RS).
The same T45 tubes are used as in WRC vehicles, the wishbones and the proven M16 motorsport uniballs offer increased rigidity and additional adjustment options. In this way, you can again achieve the camber values recommended by the manufacturer on lowered vehicles or adapt the camber to your specific needs.
WHY YOU NEED THIS
The factory wishbones do not offer the possibility to adjust the camber of the rear wheels. After a lowering or in motorsport, however, this is absolutely necessary in order to restore the values recommended by the manufacturer or to adapt the chassis to the conditions on the track. Especially when using a coilover kit, the camber must also be adjusted accordingly whenever the vehicle height is changed.
Note: When adjusting the toe links, the following values must be observed: the maximum safe length is 310 mm and the minimum length is 302 mm.
MEASUREMENTS
Delivery: 2x wishbones, 4 rubber ends to protect the Uniballs, installation instructions
Delivery time: Expected to be available in 3-4 weeks
TECHNICAL SPECIFICATIONS
Fits with:
- Audi A3/S3/RS3 8Y (from 2022)
- Audi A3/S3/RS3 8P (2005 - 2013)
- Audi A3/S3/RS3 8V/8V.5 (2015 - 2021)
- Audi TT/TTS/TTRS 8J (2007 - 2013)
- Audi TT/TTS/TTRS 8S (2015 - 2021)
- Volkswagen Eos Mk5 (2007 - 2009)
- Volkswagen Eos Mk6 (2010 - 2013)
- Volkswagen Jetta/GTI/GLI/R32 Mk5 (2006 - 2009)
- Volkswagen Golf/GTI//R Mk6 (2010 - 2014)
- Volkswagen Golf/GTI/R Mk7 (2015 - 2020)
- Volkswagen Golf/GTI/R Mk8 (from 2020)
- Volkswagen Passat (2006 - 2013)
- Volkswagen Tiguan (2008 - 2013)
- Volkswagen Jetta/GLI Mk6 (2010 - 2015)
Replaces the following OEM part number:
– 5Q0501529C / 5Q0 501 529C
– 1K0501529J / 1K0 501 529J
Installing this rear suspension arm may result in additional transmission of noise and vibration in the cabin.