VERKLINE tube wishbone suitable for Audi A3 S3 8L TT 8N front axle adjustable Uniball (steel)

✅ more direct handling
✅ individual setting
✅ Particularly suitable for racing

When the car is used on the track, the cornering forces bend the rubber in the wishbones. This changes the desired geometry of the car. This can result in slower track times and tire wear.

For this reason, Verkline has developed the Uniball wishbones, which are constructed in exactly the same way as the racing wishbones in the Porsche RS line (GT2RS, GT3RS). They were extensively tested on the Verkline track in an Audi TTRS.

The same T45 tubes are used as in WRC cars, the uniball wishbones offer increased rigidity and additional adjustment. All factory installed parts are bolted to this unit, no further modifications are required.

Features:
– Caster and camber adjustment (up to -4,5 degrees)
- no rubber to bend, you do not lose the set geometry when measuring
- Compatible with OEM subframes
– proven motorsport M18 Uniballs

DETAILS

Note: Only available for off-road, track and racing applications. Installing this rear kit can result in additional transmission of noise, vibration and harsher handling characteristics.

Delivery: 2x wishbone front axle (including hardware for installation), 4x rubber cap for Uniball protection

TECHNICAL DATA

Fits with:
1996-2003 - Audi A3/S3 (8L)
1998-2006 - Audi TT (8N)
1997-2006 - Volkswagen Golf/GTI/R32 (Mk4)

Characteristics:
- Tensile strength: 700 – 900 MPa, 0,2% yield at least 620 MPa
- Hardness test: 201 min - 262 max HB or 210 min - 275 max HV

T45 is a very unique carbon-based seamless steel tube used in a wide variety of industries such as the aerospace industry. It offers significantly better properties than, for example, Cr-Mo 4130, which is also used in motorsport.
This allows T45 to withstand extremely high G-forces without breaking or splintering.
It is carbon manganese based and conforms to full British Standards aerospace specifications.