✅ Steering angle up to 65° and parallel steering lock
✅ More usable steering angle thanks to improved geometry
✅ Higher roll center and bump steer correction
✅ minimal camber changes when compressing
✅ optimised, even restoring forces
PROVEN WITH THE PROFESSIONALS
WISEFAB steering angle kits can be found on almost every Formula Drift team. The best proof of the superior benefits and performance these kits bring.
MORE OF EVERYTHING
The specially designed wishbones give the bike significantly more room to turn. Together with the optimized tie rods, this results in a steering angle of up to 65°. If that's too much for you, you can set it smaller.
In this kit, the lower wishbone is made of one piece to withstand the extreme loads when drifting.
IMPROVED KINEMATICS AND GEOMETRY
Due to the optimized chassis geometry, the camber of the front wheels remains stable over the entire steering range and thus always offers you perfect grip on the front wheels. The Ackermann angle can also be set positive to negative.
An increased roll center improves the feedback you get from your steering and reduces body roll in corners and during rapid changes of direction. This optimization of the roll center even allows the front anti-roll bar to be removed.
Since the spread can become a problem with such large steering angles, this point was also optimized without minimizing the restoring forces. Instead, the restoring forces are almost constant and easy to control over the entire steering range thanks to sophisticated kinematics.
Furthermore, the geometry was designed in such a way that, despite the high steering angle, the steering cannot jam when the steering is fully turned.
MEASUREMENTS
The wheel bearings from the BMW E90 (part no.: 31216765157) must be used. The OEM wheel bearings cannot be used. This results in a bolt circle of 5x120 on the front axle. Thus, no OEM rims can be driven.
The OEM brake discs cannot be used with this kit. It is recommended to install a BMW E90 or E90 M3 brake system. This can be installed with the supplied adapters.
The original ABS sensor can be used with this kit.
This kit requires the use of a coilover kit and is a motorsport product and not approved for public road traffic.
Delivery: adjustable dome bearings, wishbones, tie rods, tie rod ends, steering knuckles, brake adapter for M-brakes, fastening material, installation instructions
Delivery time: 5-7 working days (from receipt of payment)
TECHNICAL SPECIFICATIONS
Manufacturers |
WISEFAB |
Suitable for |
Toyota Supra A90 |
Material |
Steel, aluminum |