✅ Steering angle up to 65° and parallel steering lock
✅ More usable steering angle thanks to improved geometry
✅ Higher roll center and bump steer correction
✅ minimal camber changes when compressing
✅ optimized restoring forces
✅ Omission of offset rack spacers due to shifting of the steering gear
✅ ABS sensor is retained
PROVEN WITH THE PROFESSIONALS
WISEFAB steering angle kits can be found on almost every Formula Drift team. The best proof of the superior benefits and performance these kits bring.
MORE OF EVERYTHING
The specially designed wishbones give the bike significantly more room to turn. Together with the optimized tie rods, this results in a steering angle of up to 65°. If that's too much for you, you can set it smaller.
The lower wishbone also has 3 mounting points for the shock absorber. The hardness of the suspension and thus the handling can be adjusted in a few minutes.
IMPROVED KINEMATICS AND GEOMETRY
Due to the optimized chassis geometry, the camber of the front wheels remains stable over the entire steering range and thus always offers you perfect grip on the front wheels.
An increased roll center improves the feedback you get from your steering and reduces body roll in corners and during rapid changes of direction. This optimization of the roll center even allows the front anti-roll bar to be removed.
Since the spread can become a problem with such large steering angles, this point was also optimized without minimizing the restoring forces. Instead, the restoring forces are almost constant and easy to control over the entire steering range thanks to sophisticated kinematics.
Furthermore, the geometry was designed in such a way that, despite the high steering angle, the steering cannot jam when the steering is fully turned.
MEASUREMENTS
Installation of the Steering Rack Relocation Kit requires cutting and welding of the front axle support.
This kit requires the use of a coilover kit and is a motorsport product and not approved for public road traffic.
Delivery: Steering knuckles, lower wishbones, tie rods, tie rod ends, adjustable dome plates, steering gear holder for welding, templates and gauges, installation instructions, fastening material
Delivery time: 5-7 working days (from receipt of payment)
TECHNICAL SPECIFICATIONS
Manufacturers |
WISEFAB |
Suitable for |
Lexus IS / JZX90 / JZX100 |
Material |
Steel, aluminum |