WISEFAB TRACK Handling & Grip Kit suitable for Toyota GT86 front axle

✅ maximum grip
✅ 45mm roll center correction
✅ 7 kg weight saving, mainly unsprung mass
✅ faster steering ratio
✅ Fully adjustable top mount (camber, caster)
✅ Track width adjustable by 24 mm

EVERYTHING UNDER CONTROL

The Toyota GT86 is an absolute talent for cornering right from the factory. However, if you lower your vehicle for even better performance, you change the factory chassis geometry in such a way that it no longer works as intended. This primarily affects the roll center and the camber of the front wheels. Both sizes are corrected by the Wisefab Kit. You can also set all values ​​in a large range.

In addition, the WISEFAB kit weighs 7 kg less than the corresponding OEM parts. This mainly affects unsprung mass.

IMPROVED KINEMATICS AND GEOMETRY

Thanks to the optimized chassis geometry, the camber of the front wheels remains in a perfect range over the entire suspension travel and thus always offers you enough grip on the front wheels. Thanks to the adjustable dome plates, you can also continuously adjust the camber of the front wheels according to your requirements. In addition, the dome plates offer a graduated adjustment of the caster.

The roll center, corrected by 45 mm, reduces body roll in curves and during rapid changes of direction.

The track width can be adjusted within a range of 24 mm with the WISEFAB kit. The steering ratio has been slightly increased so that you can keep up with the steering.

DETAILS

Minimum wheel size is 17".

Recommended backspacing is 135-140 mm (7" ET40; 8" ET30; 9" ET20). A larger ET requires the use of track plates.

All handlebars are delivered preset and can be installed directly.

The original wheel speed sensor can still be used with this kit.

This kit requires the use of a coilover kit. The kit is a motorsport product and is not approved for use on public roads.

Delivery: Steering knuckle left & right, upper wishbone left & right, lower wishbone left & right, tie rods left & right, adjustable dome plates, fastening material, installation instructions

TECHNICAL SPECIFICATIONS